Warp

From Mdspedia

This article is a stub. You can help by expanding it

Have a look at the Livecut article for some guidelines.

Once the article article is documented enough, remove the {{stub}} line.

Contents

Introduction

This plugin swap a frequency band defined between the fmin and fmax parameters while leaving the side bands unchanged. Low frequencies are mapped to high ones and high to low. The resulting sounds are highly inharmonic. You can try to set the min frequency very low (i.e.100Hz) and the max frequency to its maximum thus letting the very low frequencies pass through while swapping the remaining frequencies...

Parameters

FAQ, troobleshootings

External links